Achiever DPM-52 55 ft Tracked Aerial
Achiever DPM-52 55ft Tracked Aerial
The Ultimate Tracked Material Handler Transport on a 12 Ton Trailer
The Achiever DPM-52 Tracked Aerial with Jib is designed for stability, simplicity & ease of use for Aerial and Material Handling work. Very low 2.29 psi ground pressure and high power to weight ratio allows this unit to work where other machines can not go. Max fording with this unit is up to 36 inches of water.
The Achiever / Dur-A-lift combination provides a working height of 55 ft (57 ft with optional elevator) and a single man hydraulically rotating bucket with a 1,000 lb capacity material handling jib. Additional options include two men bucket with or without jib. Hydraulic jib tilt and continuous rotation is standard on the boom. The hydraulically leveled bucket rotates through 100o (180o available as option). Each radial corner mounted outrigger extends at 45o to provide an exceptionally stable platform. The boom is dielectrically tested and certified 46 kV Category “C”.
A 48″ wide two man bucket is available if no jib or winch is equipped” and “Extra-long front & rear outriggers (71 In) are also available and provide higher lift on hills (allows deck levelling to within 5o on 12o slopes).
Achiever DPM-52 55 ft Tracked Aerial
General Data
| Max. working height | 55′ |
| Max. side reach | 31′-6″ |
| Stowed travel height | 9′-3″ (approx.) |
| Extension boom travel | 120″ |
| Main boom travel | -35° to +80° |
| Articulated boom travel | -0° to +80° |
| Basket Capacity (Jib not in use) | 550 lbs |
| Basket Capacity (Jib in use) | 400 lbs |
| Max. jib and winch capacity | 1,000 lbs |
| Base installed weight | 16,650 lbs (approx.) |
Some available options are: Basket Liner, Basket Cover, Tool Trays, Main Boom Fiberglass Insert, Articulating Arm Glass Insert, 12 Volt Emergency Boom Rotation & Lowering, Controls with High Electrical Resistant Components (HERC), Tool Circuit at Basket and / or Base, Hydraulic Basket Leveling at Lower Controls and Hydraulically Extendible Jib. The 134 HP Tier IV Deutz AG electronic engine has cold start options down to -40ºF / -40ºC and a 17,000 BTU 12v engine coolant heater with a programmable 7 day timer is also available.
Total completed vehicle weight is approximately 17,650 lbs combined with the generously sized engine provides a greater power to weight ratio than any other tracked aerial. The difference when climbing hills in your area will be noticeable. 29″ rubber tracks are standard, optional 33″ tracks are available to provide even lower ground pressure down to 2.0 psi. One man open cab ROPS Certified to 24,000 lbs is standard, closed cab is available. Optional FOPS certified cab is also available. Maximum speed is 8 mph.
Since 1995 UTV International has been manufacturing Achiever off road tracked vehicles, Hercules digger derricks and Pioneer snow vehicles for the power, utility, telecom, forestry, mining and ski industries. UTV vehicles are designed for power, traction and stability. Simplicity & ease of use features are built in and a wide range of options are available to suit every need. Modern track and suspension design with a low center of gravity combined with a very low ground pressure are the cornerstone of our design philosophy. Continuous design & engineering advancements have resulted in our machines being the most versatile, efficient and cost effective machines available today.
We’re the one-stop rental company for all your overhead utility equipment needs!
AMP Sales & Services, LLC was established in 2017 to provide equipment, service, and training to the telecommunication industry, engineering companies, and government agencies. We are an authorized parts dealer for top brands on the market and qualified to work on any aerial device.
We are Your Upfitter Partner
Every lift that leaves our floor is custom-built to be all yours from the ground up. We can locate or build any equipment.
Dependability & Reliability
Clients value our reputation for industry dependability, focus, and expertise to deliver the best custom-built lifts.
Factory Trained Technicians
Our technicians can provide service on Underbridge, Aerials, and other Truck, Trailer, or Track-Mounted Equipment.
